View Hyundai Duralite® Flatbed Trailer Inventory
The Duralite® flatbed trailer offers new possibilities for carriers looking for a durable flatbed. With all structural steel components hot dipped galvanized, the HT Duralite® is fully protected against the elements and road chemicals.
Using high tensile 110 ksi steel for the main beam allows for weight saving holes to be placed on the web while offering a stronger structure with reduced weight.
FEATURES
(Click on the blue dots below to read more)
[image_mapper id=”8″]
Available in any length, the HT Duralite® offers value and durability for the long haul.
- Main beam structure using 100 KSI steel
- Corrosion free frame is fully hot-dip galvanized
- Combination floor with aluminum and Apitong wood planks to provide better protection against the elements
- Operator friendly cargo restraint devices
STANDARD FEATURES
- Logistic slotted stiffeners standard
- Easiest repairability of sidewall panel
- Sealed wiring harness with internal ground
- Hot-dip galvanized steel rear frame and rear underride guard
- Easy operating door lock rods with rubber handle grips for operator comfort and safety
- Water and debris resistant tail light housing
- Computer controlled machine riveting of sides and roof
| GENERAL | |
|---|---|
| Length | Exterior: 48´-0″ |
| Width | Exterior: 102″ |
| Fifth Wheel Height | Nominal: 47″ |
| Front Deck Height | Nominal: 59-3/4″ |
| Rear Deck Height | Nominal: 54-5/16″ |
| Capacity | 60,000 lbs in 10′ and 55,000 lbs. in 4′ |
| Tare Weight | 9,950 lbs |
| BODY CONSTRUCTION | |
|---|---|
| Frame | Fully hot-dip galvanized frame. Main beam is high tensile steel with a web thickness of 3/16″ and a 3/8″ (100 ksi) flange. |
| Front Plate | Aluminum extruded, 6 1/2″ high. |
| Rear Plate | Aluminum extruded, 13″ high. |
| Fifth Wheel Plate | Nominal thickness of 1/4″ (0.229″), 80 KSI minimum. |
| Kingpin | Kingpin located at 36″ from front sill. |
| Side Rails | Aluminum extruded profile with integrated winch rail. Aluminum stake pockets, pipe spools, and rub rail. |
| UNDERFRAME | |
|---|---|
| Crossmembers | Hot-dip galvanized four inch deep I beam on 16″ centers. Crossmembers bolted to main beam using brackets. |
| Upper Coupler Floor | A.A.R. rated king pin, 3-3/8” deep.
1-1/8″ Aluminum with 4 Apitong Nailer Strips. |
| Landing Gear | Two speed, 50,000 lb. capacity; A.A.R. rated, with 10″ × 10″ sandshoes with aluminum bolt-on type lower bracing. Roadside crank handle. |
| Underride Guard | D.O.T certified. Bolt-on type with perforated 4″ square tube; hot-dip galvanized with recess for conspicuity tape; end cap to prevent slippage. |
| Floor | |
|---|---|
| Wheels | Pre-painted white 8.25 × 22.5 steel disc. |
| SUSPENSION | |
|---|---|
| Suspension | Hendrickson Intraax AAT23K Air Ride with 121″ fixed spread. |
| Hub & Drums | Ten stud, hub piloted with outboard mounted brake drums. |
| Wheels | Pre-painted white 8.25 × 22.5 steel disc. |
| Tires | General HT(G), low rolling resistance tire |
| Axles | 22,500 lb. rating, 77-1/2″ track. |
| Brakes | 16.5″ × 7″ drum brakes, ‘S’ cam operated automatic slack adjuster. |
| ABS System | Two sensor, one modulator valve (2S/1M) system, no diagnostics tool. |
| Oil Seals | Stemco Platinum Performance Plus. |
| ELECTRICAL | |
|---|---|
| Lights & Wiring | Color coded 12-volt sealed system with internal ground, and watertight molded connectors to accept sealed lamps |
| PAINT & FINISH | |
|---|---|
| Paint | No Paint on unit. Main beam, crossmembers, and rear underride guard fully hot-dip galvanized. |
| Decals | D.O.T. approved Hyundai Translead logo conspicuity tape and FMCSA inspection sticker. |
| Miscellaneous | White mud flaps with Hyundai logo mounted behind axles. |
| Warranty | Limited five year warranty |
Crossmembers
The crossmembers are fully hot-dip galvanized and are bolted to the main beam with brackets. This means no welds to damage the galvanizing.
Front Plate
Front plate is made of extruded aluminum and is 6.5” high.
Main Beam
Made with high tensile steel and fully-hot dip galvanized, the beam capacity is 68,000 lbs over 10’ and 55,000 lbs over 4’. The main beam is complete with weight saving holes on the web.
Rear Plate
The rear plate is constructed using extruded aluminum and is 13” high.
Stake Pockets
Stake pockets on the side of the trailer allow for greater cargo control when needed.
Combination Floor
The combination floor is constructed using interlocking aluminum extrusions and four Apitong planks for nailing.
Thank you for your interest in Hyundai Translead products.
Please complete and submit the questionnaire below to the best of your knowledge and a Coast Hyundai Trailers sales representative will follow-up with you soon with additional information on your quote. (Blank items will default to OEM’s standard specification).
